Rice grain discoloration effect on physical properties and head rice yield in three rice cultivars
Main Article Content
Keywords
head rice, milling, physical properties, rice disease
Abstract
Rice grain discoloration is a complex disease which develops by a range of micro-organisms. Effects of fungal agents such as Alternaria sp., Curvularia sp., Cladosporium spp., Bipolaris spp. on the physical properties and head rice yield (HRY) were examined during the cropping season 2013-2014. The experiment was conducted in factorial design with two factors; three rice cultivars of Hashemi, Gohar and Khazar, and two grain disease severity levels (high and low) based on a randomised complete design with four replications. In order to attain high disease severity level, water was sprayed at the heading stage of the crop. The grains axial dimensions, geometric and arithmetic mean diameters, sphericity, surface area, volume, slenderness ratio, 1000-grain weight, as well as HRY were measured at a moisture content of 9% (wet basis). The average of length, width, thickness, surface area, volume and 1000-grain weight at the high disease severity were found to be 7.64, 2.04, 1.67 mm, 20.375 mm2, 13.796 mm3 and 24.6 g, respectively, and at the low disease severity 7.78, 2.04, 1.69 mm, 20.944 mm2, 14.341 mm3 and 26.32 g, respectively. There were significant differences between the tested cultivars for all physical properties and HRY. The average HRY with high disease severity was 54.18% and 58.18% with low disease severity.
References
Altuntas, E., Ozgoz, E. and Taser, O.F., 2005. Some physical properties of fenugreek seeds. Journal of Food Engineering 71: 37-43.
Arora, S., 1991. Physical and aerodynamic properties of rough rice (Oryzasativa L.). Indian Journal of Agricultural Engineering 1: 17-22.
Bashar, Z.U., Wayayok, A. and Soom Mohd, A.M. 2014. Determination of some physical properties of common Malaysian rice MR219 seeds. Australian Journal of Crop Science 8: 332-337.
Candole, B.L., Siebenmorgen, T.J., Lee, F.N. and Cartwright, D., 2000. Effect of rice blast and sheath blight on physical properties of selected rice cultivars. American Association of Cereal Chemists 77: 535-540.
Corrêa, P.C., Schwanz da Silva, F., Jaren, C., Afonso Junior, P.C. and Arana, I., 2007. Physical and mechanical properties in rice processing. Journal of Food Engineering 79: 137-142.
Farahmandfar, R., Farahmandfar, E. and Ramezani, A., 2009. Physical properties of rough rice. International Journal of Food Engineering 5: 1-10.
Farouk, S.M. and Islam, M.N., 1995. Effect of parboiling and milling parameters on breakage of rice grains. Agricultural Mechanization in Asia, Africa and Latin America 26: 33-38.
Ghadge, P.N. and Prasad, K., 2012. Some physical properties of rice kernels: variety PR-106. Journal of Food Processing & Technology 3: 8-12.
Hai, L.H., Kim, P.V., Du, P.V., Huy, T.T. and Thanh, D.N., 2007. Grain yield and grain-milling quality as affected by rice blast disease (Pyriculariagrisea), at My Thanh Nam, Cailay, Tien Giang. Omonrice 15: 102-107.
International Rice Research Institute (IRRI), 2004. Main milling practices. IRRI, Los Baños, Philippines, 199 pp.
Jain, R.K. and Bal, S., 1997. Properties of pearl millet. Journal of Agricultural Engineering Research 66: 85-91.
Kachru, R.P., Gupta, R.K. and Alam, K., 1994. Physico-chemical constituents and engineering properties of food crops. Scientific Publishers, Jodhpur, India.
Khanzada, K.A., Rajput, M.A., Shah, G.S., Lodhi, A.M. and Mehboob, F., 2002. Effect of seed dressing fungicides for the control of seed borne mycoflora of wheat. Asian Journal Plant Science 1: 441-444.
Liu, K., Cao, X., Bai, Q., Wen, H. and Gu, Z., 2009. Relationships between physical properties of brown rice and degree of milling and loss of selenium. Journal of Food Engineering 94: 69-74.
Marchezan, E., 1991. Grãos inteiros em arroz [Whole rice kernels in rice]. Lavoura Arrozeira 44: 3-8.
Minaei, S., Alizadeh, M.R., Khoshtaghaza, M.H. and Tavakoli, T., 2007. Effects of de-awning and moisture content on husking characteristics of paddy in rubber-roll husker. American-Eurasian Journal of Agricultural & Environmental Sciences 2: 1-5.
Mohsenin N.N., 1986. Physical properties of plant and animal materials. Gordon and Breach Science Publisher, New York, NY, USA.
Neninger, L.H., Barrios, L.M. and Hidalgo, E.I., 2003. Micobiota asociada y patogénica presente en semillas de arroz (OryzasativaL.) nacionale importada en Cuba. Phytopathology 92: S128.
Orthoefer, F.T., 2005. Rice brain oil. In: Shahidi, F. (ed.) Bailey’s industrial oil and fat products (6th Ed.). John Wiley & Sons, Inc., New York, NY, USA.
Phat, C.T., Thi Duong, C.N. and Thi Du, L., 2005. Influence of grain discoloration to seed quality. Omonrice 13: 139-144.
Pinciroli, M., Gribaldo, A., Vidal, A., Bezus, R. and Sisterna, M., 2013. Mycobiota evolution during storage of paddy, brown and milled rice in different genotypes. Summa Phytopathology Botucatu 39: 157-161.
Pizzati, C. and Cortesi, P., 2008. Effect of chemicals, nitrogen, time of sowing and panicle brown spot epidemics on rice grain discolouration in Italy. Journal of Plant Pathology 90: 197-209.
Reddy, B.S. and Chakraverty, A., 2004. Physical properties of raw and parboiled paddy. Biosystems Engineering88: 461-466.
Roy, P., Orikasa, T., Okadome, H., Nakamura, N. and Shiina, T., 2011. Processing conditions, rice properties, health and environment. International Journal of Environmental Research and Public Health 8: 1957-1976.
Ryan, E.P., 2011. Bioactive food components and health properties of rice bran. Journal of the American Veterinary Medical Association 238: 593-600.
Sharma, S.K., Dubey, K. and Teckchandani, C.K., 1997. Engineering properties of black gram, soybean and green gram. Proceedings of Indian Society of Agricultural Engineers 3: 181-185.
Sheehy, J.E., Elmido, A., Centeno, G. and Pablico, P., 2005. Searching for new plants for climate change. Journal of Agricultural Meteorology 60: 463-468.
Shitanda, D., Nishiyama, Y. and Koide, S., 2001. PH-postharvest technology: performance analysis of an impeller husker considering the physical and mechanical properties of paddy rice. Journal of Agricultural Engineering Research 79: 195-203.
Shitanda, D., Nishiyama, Y. and Koide, S., 2002. Compressive strength of rough rice considering variation of contact area. Journal of Food Engineering 53: 53-58.
Van Du, P., Loan, L.C. and Cuong, N.D., 2001. Survey on seed borne fungi and its effects on grain quality of common rice cultivars in the Mekong Delta. Omonrice 9: 107-113.
Varnamkhasti, M.G., Mobli, H., Jafari, A., Rafiee, S., Heidari Soltanabadi, M. and Kheiralipour, M., 2007. Some engineering properties of paddy (var. Sazandegi). International Journal of Agriculture and Biology 9: 763-766.
Wiset, L., Srzednicki, G., Driscoll, R.H., Nimmuntavin, C. and Siwapornrak, P., 2001. Effects of high temperature drying on rice quality. The CIGR Journal of Scientific Research and Development 3: 17-23.
Yan, T.Y., Hong, J.H. and Chung, J.H., 2005. A prediction of white improved method for the embryo in vertical mill. Biosystems Engineering 49: 303-309.
Yang, W., Siebenmorgen, T.G., Thielen, T.P.H. and Cnossen, A.G., 2003. Effect of glass transition on conductivity of rough rice. Biosystems Engineering 84: 193-200.
Zareiforoush, H., Komarizadeh, M.H. and Alizadeh, M.R., 2009. Effect of moisture content on some physical properties of paddy grains. Research Journal of Applied Sciences, Engineering and Technology 1: 132-139.